NEW BERLIN, N.Y. – Red Bull KTM Factory Racing's Jorge Prado claimed his third 450MX podium of the 2026 season at Unadilla, charging to a convincing 3-2 moto scorecard for second overall in Round 9 of the AMA Pro Motocross Championship.
Following a three-week break in the outdoors, Prado qualified third on board his KTM 450 SX-F FACTORY EDITION around the technical, rutted track layout, posting a 2:12.842 lap time before converting a strong start into a P3 result in Moto 1.
The four-time world champion was able to challenge for victory throughout Moto 2, ultimately securing a hard-fought second position and P2 overall for the round. He continues to hold fourth in the 450MX championship standings with two rounds remaining.
Jorge Prado: "We had those three weeks to work on the bike and we knew exactly what we needed to do. I was convinced that we were on the right path with my decisions, and it showed today. It was the best race of the year for me – we had really good speed battling with Jett [Lawrence] in that second moto, and we were pulling away from everyone. I’m super-happy, thanks to the whole Red Bull KTM Factory Racing team for believing in me.”
Four-time 450MX champion Eli Tomac recorded the ninth-fastest time on the combined 450MX timesheets at Unadilla, powering his KTM 450 SX-F FACTORY EDITION to an improved seventh-place finish in Moto 1 after running inside the top-five early on.
A slow start to Moto 2 saw Tomac charge through to 11th by the checkered flag, taking 11th overall for the weekend as the 33-year-old continues to build toward form late in the Pro Motocross season.
Eli Tomac: "We made some small improvements from the previous race in Washougal. I got a good start in Moto 1 and was around the top-five for maybe half of that race. I lost a couple positions late, but overall, I was happy with the improvements. And then in Moto 2, I was really buried off the start, and we had to make our way forward from there. So, small improvements this week, and I think we’ll keep getting better.”
Red Bull KTM Factory Racing's Aaron Plessinger made a welcome return to the 450MX field at Round 9 after having been absent since RedBud, with 'The Cowboy' encountering unfortunate issues across both motos contested.
Despite those setbacks, Plessinger gained important race mileage aboard his KTM 450 SX-F FACTORY EDITION and will now shift his focus to Budds Creek next weekend.
Aaron Plessinger: “It was a rough day! Sometimes it goes your way, and sometimes it doesn’t – we had issues in both motos that were out of anybody’s control. Either way, we were on the start line again after some time off, which is a positive, and we’ll look forward to the next two coming up.”
Equipped with the KTM 250 SX-F FACTORY EDITION in the 250MX division, Julien Beaumer qualified fourth-fastest at Unadilla with a 2:16.361 lap-time to open the day.
The Red Bull KTM Factory Racing rider finished ninth in Moto 1 after an opening lap fall, before a first-turn incident in Moto 2 forced him to charge from the rear of the pack to P13. That resulted in 10th overall, while maintaining third in the standings.
Julien Beaumer: "It was a tough day at Unadilla. In the first moto, I got a good start and then went down on Lap 1, so I fought from the back in that one. Then, yeah, second moto, a lot of riders went straight in the first turn, I got caught in it and was dead-last. I did what I could to give everything I had, but it is what it is – we’ll bounce back next weekend.”
Source: Red Bull KTM Factory Racing
Photo: KTM Images/© Align Media
RACING IS IN AKRAPOVIČ DNA
RACING PARTNERS
Akrapovič is a proud partner to some of the world’s most iconic automotive and motorcycle brands. The company’s determination to supply the most innovative solutions and state-of-the-art products has positioned Akrapovič as one of the important OEM suppliers in the automotive and motorcycle industry.

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.
Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.


SELECT MOTORCYCLE BRAND